Monday, August 22, 2016

Porcelain vs. Ceramic Tile: A 5-Scenario Showdown

by Sam Ferris

Explore where and why one of these popular 

tile choices makes more sense than the other


All tile is created equal, right? Not quite. Porcelain and ceramic may belong to the same family, but they’re two slightly different products. One may be more advantageous than the other depending on where you’re installing it. Here we pose five scenarios and explain whether porcelain or ceramic is the better choice.

But before we walk through each scenario, let’s note the key difference between porcelain and ceramic tile. Though they’re manufactured with different types of clay, the Tile Council of North America defines porcelain in terms of water absorption. Specifically, porcelain tiles absorb less than 0.5 percent of water. Ceramic and other non-porcelain tiles absorb more than 0.5 percent water.

Scenario 1: You’re installing tile in a room with high moisture content.

The best pick: Porcelain

Remember, the TCNA defines porcelain as tile that absorbs less than 0.5 percent of moisture. Why doesn’t porcelain absorb much moisture? According to the TCNA, porcelain is naturally dense, which means it’s harder to penetrate. In other words, it’s nearly waterproof. This property makes porcelain a no-brainer for bathroom installations, as well as other areas of your home that are exposed to moisture.

This doesn’t necessarily mean that ceramic is a bad choice for bathrooms. In fact, many homeowners install ceramic in their showers and on their bathroom floors. However, porcelain’s impermeability will ensure you have the best protection against moisture.

Kitchens can also be considered wet zones due to liquids encountered during food prep and clean up, as well as the presence of your sink and dishwasher. You may feel more comfortable with porcelain in the event your dishwasher or sink leaks.

Mudrooms usually bear the brunt of the dirty shoes and feet that enter your home daily. Porcelain is built to withstand exposure to moisture from rain, sleet or snow. You may also prefer porcelain in your laundry room in the event your washer leaks.

Scenario 2: You’re on a budget.

The best pick: Ceramic

Not all porcelain tile is costly, but if you shop around long enough, you’ll start to notice a trend: It’s generally more expensive than ceramic. If you’re on a tight budget, ceramic will fit the bill.

Budget doesn’t mean passé when it comes to ceramic tile. Fortunately, you can still find ceramic tiles that showcase the latest industry trends, such as wood-look tile.

Scenario 3: You’re installing tile in a space with high foot traffic.

The best pick: 
Porcelain

Both ceramic and porcelain excel in high-traffic areas in comparison with other flooring types (such as hardwood, laminate and carpet). But porcelain is a denser tile, and as a result it offers better long-term resistance to scuffs and scratches. Through-body porcelain, where the color on top of the tile goes all the way throughout the tile’s body, is especially scratch resistant. Living rooms and hallways are two of the perfect places to install porcelain. Households with children and pets will appreciate porcelain’s durability.


As the heart of the home, kitchens experience a fair share of foot traffic too. If your cooking space is your home’s social hub and a common gathering place for your family and guests, porcelain is the best option.

Scenario 4: You’re a DIY aficionado.

The best pick: Ceramic

Density isn’t always a perk. Ceramic is easier to cut and install than porcelain is. According to the TCNA, non-porcelain tiles are easier to affix to the floor than porcelain tile. If you’re planning to install tile yourself, especially in a situation where many cuts are required, you could find yourself in hot water. The job could quickly turn sloppy, and you may dish out more money to have a pro correct your mistakes.

Scenario 5: You’re remodeling your patio floors.

The best pick: Porcelain

When it comes to patio flooring, the great outdoors can be unforgiving. This is another scenario where porcelain’s impermeability wins. When ceramic tile freezes, it absorbs moisture. This causes ceramic to expand and break. You could be looking at a flooring replacement much sooner than expected.

If you live in an area that is prone to hard freezes, ceramic tile is out of the question for an outdoor space. If you live in a climate where freezes are occasional or uncommon, ceramic is risky at best. Carefully weigh your decision when deciding between porcelain or ceramic.

Whether your looking for tile to install on a backsplash, floor or shower, Cabinet-S-Top has a wide variety of porcelain and ceramic tile to choose from.  Visit their showroom located at 1977 Medina Road, Medina, OH  44256 to check out their large selection.


Thursday, August 18, 2016

Kitchen Confidential: 7 Ways to Mix and Match Cabinet Colors

by Sam Ferris

Can't decide on a specific color or stain for your kitchen
cabinets?  
You don't have to choose just one



There are as many ways to add color to your kitchen as there are hues to choose from, but cabinets will always be prime real estate for a zap of personality. While many homeowners settle on just one shade, choosing multiple cabinet colors can give your space a designer edge. (It’s also a godsend if you’re indecisive.) If you’re searching for ways to blend two or more color tones into your kitchen design, check out these seven ideas that offer a blueprint for mixing and matching cabinet colors.

1. Turn your island into an accent piece. It’s a classic way to incorporate a second color into your cabinet design, no matter what the style of your kitchen is. It can spice up clean, contemporary designs without adding unnecessary detail, or it can add another layer of color to complement wall paint and decor in traditional designs. The options are especially endless when you go with white or off-white for your main cabinets.

That said, white kitchens aren’t for everyone. If you prefer deep wood tones, you can still use your island as an accent piece without white cabinets. This traditional Texas kitchen creates a down-to-earth country feel by coupling alder wood cabinets with an olive green island finish.


2. Use three complementary colors instead of two. If you’re not satisfied with just two hues for your kitchen cabinet design, keep flipping through the color swatches to find a third color. Not only do three shades give your kitchen more of a designer feel, they also evenly distribute color throughout the space.

White is a good starting point because it pairs well with other neutrals as well as bold primary colors. Mark English Architects chose to balance this modern kitchen’s white cabinets with both tall black cabinets and a smack of high-gloss orange cabinets.

Not every three-toned cabinet design needs a primary color, so feel free to stick with neutral tones, especially in industrial and rustic designs. This San Francisco kitchen stays true to its farmhouse roots with a rural color palette that includes white, brown and dark gray.


3. Accentuate a single cabinet piece. The island doesn’t always have to be the showpiece of the kitchen. It certainly isn’t the only cabinetry that can flaunt a splash of color. Wooden hoods, glass wall cabinets or even sink and range base cabinets are hot spots for a dab of baby blue or rustic red. It’s an unconventional way to design colorful accent pieces that aren’t overly fussy.


4. Choose a different color for your uppers and lowers. Designating one color tone for your upper cabinets and another for your lowers is a way to inject color into your kitchen and maintain an organized design. Choose a darker color for your lower cabinets to ground the design, then experiment with lighter shades like whites and grays on the upper. This prevents the design from feeling too top-heavy.


5. Add a stain or glaze to one of your cabinet colors. While an antique finish or charcoal glaze can add extra oomph to your accent color, it can also soften your main cabinet color. This rustic kitchen’s antique white cabinets allow the dark island stain to command its fair share of attention in a space full of visual intrigue.

6. Play with texture. Mix different colors with different textures, as this transitional kitchen does. It combines a midnight blue painted finish on its upper cabinets with a grainy wood veneer on its lower cabinets. Exploring textures like wood and metal along with color can give you a kitchen design that breaks the mold.

7. Break the rules. Yes, it’s OK to toss the rules of design aside (for a moment, at least) and let your creativity run wild. Design with daring color combinations, or opt for singularity instead of contrast. Put color in places it shouldn’t be, such as single drawers or cabinet doors. This eclectic kitchen does just that, integrating seven color tones into a unique puzzle-piece design.

Not many designers would think to incorporate three color tones from the same family in their cabinet design, but Brian O’Tuama Architects did in this contemporary kitchen. The spectrum effect is truly one-of-a-kind, and that type of creativity can help personalize your own kitchen space and make it yours.

Cabinet-S-Top's professional designers can help guide you through the choices available for your kitchen remodeling project.  Give them a call at 330.239.3630 to set up a time to meet.  Their one-stop showroom is located at 1977 Medina Road, Medina, OH  44256 ~ www.cabinet-s-top.com



Monday, August 1, 2016

13 Ideas for Creative Corners

by Sam Ferris

Here are clever ways to make the most of kitchen corners to get extra storage and additional seating

Whether you’re working with a professional or tackling the process on your own, designing a kitchen can involve a lot of decisions. Kitchen corners are one area where it’s easy to get stuck. You may want to save money with a standard cabinet. You may want swinging pullouts to eliminate bending and reaching. Or you may not have the space for either option. If you’re struggling to make up your mind or are unsure of where to start, don’t stress. These 13 solutions will help you pick out the most efficient and functional option for your kitchen.

1. Blind corner. Considered a standard solution for kitchen corners, a blind cabinet allows homeowners to access the void created when two walls of cabinetry meet at a corner. This space is accessible via a single cabinet door. 

The downside, of course, is that while you may be able to access this space, it isn’t always easy to do it. You often have to get down on your hands and knees and reach into the back of your cabinet to find what you need. Because of this, these spaces often become junk bins that are left untouched for years.

If you’re on a tight budget, blind corners can knock a few numbers off your bill. They’re less expensive than customized corner options like lazy Susans and swinging pullouts.


2. Lazy Susan. This classic storage solution lets you place dishes, strainers, pots and pans on turnstiles and access them with a twirl of the finger. It doesn’t completely eliminate bending and reaching, but it does make the space easier to access and, as a result, more functional. The biggest drawback is that storage space can get tight.

3. Drawers. Two, three- and even four-drawer corner cabinets offer quick access to your stored items, along with plenty of storage space (especially in pieces that have deep drawers). Their accordion-like appearance can also add an interesting dynamic to your cabinetry’s aesthetics.

4. Swinging pullouts. Another way to store bulky pots and pans, swinging pullouts outperform lazy Susans by bringing your cooking utensils out of your cabinet and right in front of you, significantly reducing the amount of bending and reaching. Your storage space is limited, but the accessibility and convenience may be well worth the sacrifice. These are considered upgrades and cost more than a standard blind cabinet.

5. Diagonal cabinet. These can be prefabricated boxes or custom-built. You can even insert a standard cabinet box at a 45-degree angle if there isn’t a prefabricated cabinet available. 

Diagonal corner cabinets are a nice visual break and can add dimension to your kitchen. They often utilize the entire corner space, but as with blind corner cabinets, you will have to reach back into the recesses of the cabinet to find your dishware.


6. Sink base. It may not maximize space, but a corner sink base just might be worth it if there’s a view involved. The extra counter space behind your sink can house your finest decor (and show it off to the neighbors, too).

7. Dead space. Maximizing space is always preferred to wasting space. However, leaving dead space may be the best option for your kitchen, especially if you’re renovating an older home with a dysfunctional layout. Sometimes you won’t be able to fit in a prefabricated corner cabinet. Dead space can also be your best bet if you’re trying to save money on your cabinets or are flipping a low-value home.

8. Sitting area. If you’re willing to give up some storage and counter space, a built-in banquette is a creative way to make your cabinetry feel cozy and inviting, as well as add seating space. Your cushions, pillows and linens can complement your kitchen’s decorative scheme.


9. Built-in pantry. If you want to keep your cooking ingredients within reach, you can insert a custom-built corner pantry into your kitchen design. This transitional kitchen has a pantry placed at an equal distance between the range and sink, which can speed up food prep time for some homeowners. The major sacrifices here are counter space and affordability.


10. Standard cabinet. You don’t always have to install a corner cabinet. Sometimes you won’t have the space to fit one in (as in the kitchen above). Or you may simply want an open cabinet design. This is where a standard cabinet can be the best choice for your layout and needs.

It won’t present any accessibility problems, though some homeowners may miss the extra storage space that corner cabinets provide.


11. Appliance garage. Storing a blender, mixer and toaster on your counter can be an unpleasant sight. At the same time, these appliances can be heavier than other types of cookware, so storing them below your counter can be a pain for your back. Appliance garages solve both of these problems. You can hide appliances behind a lift door and slide them out when you’re ready to whip up dinner. You’ll give up counter space, but it will help keep your remaining space clutter-free.


12. Easy-reach cabinet. These have a double door front that opens like an accordion, displaying both sides of your cupboard at once. They take full advantage of available corner space. You won’t have to dig deep into a blind cabinet while you’re standing on a step stool. Naturally, easy-reach cabinets are more expensive than standard blind cabinets. Make sure you budget for this type of upgrade.

13. Open shelving. Wrapping shelves around your wall corner will give you access to the entire space and cut costs in the process. Open shelving is also a minimalist feature that works well in modern, contemporary, industrial and farmhouse designs. The major con is that it’s extra work to keep the shelves clean and organized.


Ready to start your kitchen remodel?  Stop by Cabinet-S-Top located at 1977 Medina Road, Medina, OH and meet with one of their professional designers to discuss what is the best option for your kitchen.  330.239.3630 ~ www.cabinet-s-top.com